Skip to content

Releases: filecoin-project/lotus

v1.34.1

16 Sep 18:01
@github-actions github-actions
v1.34.1
710b4ac
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.
Compare
Choose a tag to compare
v1.34.1 Latest
Latest

Node and Miner v1.34.1 / 2025-09-15

This is a non-critical patch release that fixes an issue with the Lotus v1.34.0 release where the incorrect version of filecoin-ffi was included. Lotus v1.34.0 used filecoin-ffi v1.34.0-dev when it should have used v1.34.0. This isn’t critical since it’s the same filecoin-ffi version used during the nv27 Calibration network upgrade, but for consistency with other Node implementations like Forest, we are creating this release. This ensures the inclusion of ref-fvm v4.7.3 update that was missing in v1.34.0. All users of v1.34.0 are encouraged to upgrade to v1.34.1.

Node and Miner v1.34.0 / 2025-09-11

This is a MANDATORY Lotus v1.34.0 release, which will deliver the Filecoin network version 27, codenamed “Golden Week” 🏮. This release candidate sets the upgrade epoch for the Mainnet network to Epoch 5348280: 2025-09-24T23:00:00Z. (See the local time for other timezones.)

☢️ Upgrade Warnings ☢️

  • All Lotus node and Storage Provider (SP) operators must upgrade to v1.34.x before the specified date for the Mainnet network.
  • The /v1 Ethereum APIs have "F3 awareness" for all Ethereum calls where "finalized" or "safe" are supplied. Nodes will likely return different (and likely more recent) results in v1.34.x+ than previous versions when these tags are used. See more info below.

🏛️ Filecoin network version 27 FIPs and FRCs

📦 v17 Builtin Actor Bundle

This release candidate uses v17.0.0.

🚚 Migration

All node operators, including storage providers, should be aware that ONE pre-migration is being scheduled 120 epochs before the network upgrade. The migration for the NV27 upgrade is expected to be light with no heavy pre-migrations:

  • Pre-Migration is expected to take less then 1 minute.
  • The migration on the upgrade epoch is expected to take less than 30 seconds on a node with a NVMe-drive and a newer CPU. For nodes running on slower disks/CPU, it is still expected to take less then 1 minute.
  • RAM usages is expected to be under 20GiB RAM for both the pre-migration and migration.

We recommend node operators (who haven’t enabled splitstore discard mode) that do not care about historical chain states, to prune the chain blockstore by syncing from a snapshot 1-2 days before the upgrade.

For certain node operators, such as full archival nodes or systems that need to keep large amounts of state (RPC providers), we recommend skipping the pre-migration and run the non-cached migration (i.e., just running the migration at the network upgrade epoch), and schedule for some additional downtime. Operators of such nodes can read the How to disable premigration in network upgrade tutorial.

⭐ New Features highlight

  • feat(eth): use F3 for "finalized" and "safe" resolution in v1 APIs. This switches the /v1 Ethereum APIs to have the same resolution rules as /v2, enabling F3 awareness for all Ethereum calls where "finalized" or "safe" is supplied. See F3-aware Ethereum APIs via /v2 endpoint and improvements to existing /v1 APIs below for details of how the /v2 APIs work as introduced in the 1.33.0 release. Set the environment variable LOTUS_ETH_V1_DISABLE_F3_FINALITY_RESOLUTION to 1 to revert this behaviour but note that the option to revert will likely be removed in a future release (tracking issue). (filecoin-project/lotus#13298)
  • feat(f3): expose simple ChainGetFinalizedTipSet API on v1 (and gateway) that just returns the latest F3 finalized tipset, or falls back to EC finality if F3 is not operational on the node or if the F3 finalized tipset is further back than EC finalized tipset. This API can be used for follow-up state calls that clamp to a specific tipset to have assurance of state finality. (filecoin-project/lotus#13299)
  • feat: support for F3-aware snapshot v2 format per FRC-0108 (filecoin-project/lotus#13282)
    • snapshot export now defaults to v2 format with embedded F3 finality certificates, dramatically reducing F3 catchup time from ~8 hours
    • transparently imports both v1 and v2 snapshot formats
    • to export v1 snapshots, use lotus chain export --skip-old-msgs --recent-stateroots=2001 --snapshot-version=1 <filename>
  • feat(net): add LOTUS_ENABLE_MESSAGE_FETCH_INSTRUMENTATION=1 to turn on metrics and debugging for local vs bitswap message fetching during block validation (filecoin-project/lotus#13221)

👌 Improvements

  • chore(docs): mark v0 API as "deprecated" and v1 as "stable" (filecoin-project/lotus#13264)
  • feat(api): add StateMinerCreationDeposit API method for FIP-0077 - calculates the deposit required for creating a new miner (filecoin-project/lotus#13308)
  • feat(spcli): correctly handle the batch logic of lotus-miner actor settle-deal (#13189)
  • feat(spcli): add --all-deals to lotus-miner actor settle-deal (#13243)

🐛 Bug Fixes

📝 Changelog

For the set of changes since the last stable release:

Changes since RC2

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Rod Vagg 12 +1856/-720 49
TippyFlits 6 +1312/-897 60
tediou5 1 +610/-22 14
Phi-rjan 11 +455/-169 29
chris-4chain 1 +222/-23 7
Steven Allen 1 +142/-68 3
beck 2 +141/-52 8
dependabot[bot] 12 +81/-86 24
Steve Loeppky 5 +90/-42 22
hanabi1224 2 +91/-24 3
raul0ligma 1 +88/-4 5
William Morriss 3 +41/-13 7
Copilot 1 +46/-0 1
deepdring 1 +6/-6 6
Block Wizard 3 +6/-6 5
wmypku 1 +4/-4 2
queryfast 1 +4/-4 4
minxinyi 1 +4/-4 4
web3-bot 2 +3/-3 3
tzchenxixi 1 +3/-3 3
haouvw 1 +3/-3 2
TimberLake 1 +3/-3 2
Jakub Sztandera 2 +3/-3 3
Micke 1 +2/-2 2
longhutianjie 1 +1/-1 1
Piotr Galar 1 +1/-1 1
Phi 1 +1/-1 1
Assets 8
Loading

miner/v1.34.1

16 Sep 18:01
@github-actions github-actions
miner/v1.34.1
710b4ac
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.
Compare
Choose a tag to compare
miner/v1.34.1

Node and Miner v1.34.1 / 2025-09-15

This is a non-critical patch release that fixes an issue with the Lotus v1.34.0 release where the incorrect version of filecoin-ffi was included. Lotus v1.34.0 used filecoin-ffi v1.34.0-dev when it should have used v1.34.0. This isn’t critical since it’s the same filecoin-ffi version used during the nv27 Calibration network upgrade, but for consistency with other Node implementations like Forest, we are creating this release. This ensures the inclusion of ref-fvm v4.7.3 update that was missing in v1.34.0. All users of v1.34.0 are encouraged to upgrade to v1.34.1.

Node and Miner v1.34.0 / 2025-09-11

This is a MANDATORY Lotus v1.34.0 release, which will deliver the Filecoin network version 27, codenamed “Golden Week” 🏮. This release candidate sets the upgrade epoch for the Mainnet network to Epoch 5348280: 2025-09-24T23:00:00Z. (See the local time for other timezones.)

☢️ Upgrade Warnings ☢️

  • All Lotus node and Storage Provider (SP) operators must upgrade to v1.34.x before the specified date for the Mainnet network.
  • The /v1 Ethereum APIs have "F3 awareness" for all Ethereum calls where "finalized" or "safe" are supplied. Nodes will likely return different (and likely more recent) results in v1.34.x+ than previous versions when these tags are used. See more info below.

🏛️ Filecoin network version 27 FIPs and FRCs

📦 v17 Builtin Actor Bundle

This release candidate uses v17.0.0.

🚚 Migration

All node operators, including storage providers, should be aware that ONE pre-migration is being scheduled 120 epochs before the network upgrade. The migration for the NV27 upgrade is expected to be light with no heavy pre-migrations:

  • Pre-Migration is expected to take less then 1 minute.
  • The migration on the upgrade epoch is expected to take less than 30 seconds on a node with a NVMe-drive and a newer CPU. For nodes running on slower disks/CPU, it is still expected to take less then 1 minute.
  • RAM usages is expected to be under 20GiB RAM for both the pre-migration and migration.

We recommend node operators (who haven’t enabled splitstore discard mode) that do not care about historical chain states, to prune the chain blockstore by syncing from a snapshot 1-2 days before the upgrade.

For certain node operators, such as full archival nodes or systems that need to keep large amounts of state (RPC providers), we recommend skipping the pre-migration and run the non-cached migration (i.e., just running the migration at the network upgrade epoch), and schedule for some additional downtime. Operators of such nodes can read the How to disable premigration in network upgrade tutorial.

⭐ New Features highlight

  • feat(eth): use F3 for "finalized" and "safe" resolution in v1 APIs. This switches the /v1 Ethereum APIs to have the same resolution rules as /v2, enabling F3 awareness for all Ethereum calls where "finalized" or "safe" is supplied. See F3-aware Ethereum APIs via /v2 endpoint and improvements to existing /v1 APIs below for details of how the /v2 APIs work as introduced in the 1.33.0 release. Set the environment variable LOTUS_ETH_V1_DISABLE_F3_FINALITY_RESOLUTION to 1 to revert this behaviour but note that the option to revert will likely be removed in a future release (tracking issue). (filecoin-project/lotus#13298)
  • feat(f3): expose simple ChainGetFinalizedTipSet API on v1 (and gateway) that just returns the latest F3 finalized tipset, or falls back to EC finality if F3 is not operational on the node or if the F3 finalized tipset is further back than EC finalized tipset. This API can be used for follow-up state calls that clamp to a specific tipset to have assurance of state finality. (filecoin-project/lotus#13299)
  • feat: support for F3-aware snapshot v2 format per FRC-0108 (filecoin-project/lotus#13282)
    • snapshot export now defaults to v2 format with embedded F3 finality certificates, dramatically reducing F3 catchup time from ~8 hours
    • transparently imports both v1 and v2 snapshot formats
    • to export v1 snapshots, use lotus chain export --skip-old-msgs --recent-stateroots=2001 --snapshot-version=1 <filename>
  • feat(net): add LOTUS_ENABLE_MESSAGE_FETCH_INSTRUMENTATION=1 to turn on metrics and debugging for local vs bitswap message fetching during block validation (filecoin-project/lotus#13221)

👌 Improvements

  • chore(docs): mark v0 API as "deprecated" and v1 as "stable" (filecoin-project/lotus#13264)
  • feat(api): add StateMinerCreationDeposit API method for FIP-0077 - calculates the deposit required for creating a new miner (filecoin-project/lotus#13308)
  • feat(spcli): correctly handle the batch logic of lotus-miner actor settle-deal (#13189)
  • feat(spcli): add --all-deals to lotus-miner actor settle-deal (#13243)

🐛 Bug Fixes

📝 Changelog

For the set of changes since the last stable release:

Changes since RC2

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Rod Vagg 12 +1856/-720 49
TippyFlits 6 +1312/-897 60
tediou5 1 +610/-22 14
Phi-rjan 11 +455/-169 29
chris-4chain 1 +222/-23 7
Steven Allen 1 +142/-68 3
beck 2 +141/-52 8
dependabot[bot] 12 +81/-86 24
Steve Loeppky 5 +90/-42 22
hanabi1224 2 +91/-24 3
raul0ligma 1 +88/-4 5
William Morriss 3 +41/-13 7
Copilot 1 +46/-0 1
deepdring 1 +6/-6 6
Block Wizard 3 +6/-6 5
wmypku 1 +4/-4 2
queryfast 1 +4/-4 4
minxinyi 1 +4/-4 4
web3-bot 2 +3/-3 3
tzchenxixi 1 +3/-3 3
haouvw 1 +3/-3 2
TimberLake 1 +3/-3 2
Jakub Sztandera 2 +3/-3 3
Micke 1 +2/-2 2
longhutianjie 1 +1/-1 1
Piotr Galar 1 +1/-1 1
Phi 1 +1/-1 1
Loading

v1.34.0

11 Sep 20:26
@github-actions github-actions
v1.34.0
56e13cc
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.
Compare
Choose a tag to compare
v1.34.0

Node and Miner v1.34.0 / 2025-09-11

This is a MANDATORY Lotus v1.34.0 release, which will deliver the Filecoin network version 27, codenamed “Golden Week” 🏮. This release candidate sets the upgrade epoch for the Mainnet network to Epoch 5348280: 2025-09-24T23:00:00Z. (See the local time for other timezones.)

☢️ Upgrade Warnings ☢️

  • All Lotus node and Storage Provider (SP) operators must upgrade to v1.34.x before the specified date for the Mainnet network.
  • The /v1 Ethereum APIs have "F3 awareness" for all Ethereum calls where "finalized" or "safe" are supplied. Nodes will likely return different (and likely more recent) results in v1.34.x+ than previous versions when these tags are used. See more info below.

🏛️ Filecoin network version 27 FIPs and FRCs

📦 v17 Builtin Actor Bundle

This release candidate uses v17.0.0.

🚚 Migration

All node operators, including storage providers, should be aware that ONE pre-migration is being scheduled 120 epochs before the network upgrade. The migration for the NV27 upgrade is expected to be light with no heavy pre-migrations:

  • Pre-Migration is expected to take less then 1 minute.
  • The migration on the upgrade epoch is expected to take less than 30 seconds on a node with a NVMe-drive and a newer CPU. For nodes running on slower disks/CPU, it is still expected to take less then 1 minute.
  • RAM usages is expected to be under 20GiB RAM for both the pre-migration and migration.

We recommend node operators (who haven’t enabled splitstore discard mode) that do not care about historical chain states, to prune the chain blockstore by syncing from a snapshot 1-2 days before the upgrade.

For certain node operators, such as full archival nodes or systems that need to keep large amounts of state (RPC providers), we recommend skipping the pre-migration and run the non-cached migration (i.e., just running the migration at the network upgrade epoch), and schedule for some additional downtime. Operators of such nodes can read the How to disable premigration in network upgrade tutorial.

⭐ New Features highlight

  • feat(eth): use F3 for "finalized" and "safe" resolution in v1 APIs. This switches the /v1 Ethereum APIs to have the same resolution rules as /v2, enabling F3 awareness for all Ethereum calls where "finalized" or "safe" is supplied. See F3-aware Ethereum APIs via /v2 endpoint and improvements to existing /v1 APIs below for details of how the /v2 APIs work as introduced in the 1.33.0 release. Set the environment variable LOTUS_ETH_V1_DISABLE_F3_FINALITY_RESOLUTION to 1 to revert this behaviour but note that the option to revert will likely be removed in a future release (tracking issue). (filecoin-project/lotus#13298)
  • feat(f3): expose simple ChainGetFinalizedTipSet API on v1 (and gateway) that just returns the latest F3 finalized tipset, or falls back to EC finality if F3 is not operational on the node or if the F3 finalized tipset is further back than EC finalized tipset. This API can be used for follow-up state calls that clamp to a specific tipset to have assurance of state finality. (filecoin-project/lotus#13299)
  • feat: support for F3-aware snapshot v2 format per FRC-0108 (filecoin-project/lotus#13282)
    • snapshot export now defaults to v2 format with embedded F3 finality certificates, dramatically reducing F3 catchup time from ~8 hours
    • transparently imports both v1 and v2 snapshot formats
    • to export v1 snapshots, use lotus chain export --skip-old-msgs --recent-stateroots=2001 --snapshot-version=1 <filename>
  • feat(net): add LOTUS_ENABLE_MESSAGE_FETCH_INSTRUMENTATION=1 to turn on metrics and debugging for local vs bitswap message fetching during block validation (filecoin-project/lotus#13221)

👌 Improvements

  • chore(docs): mark v0 API as "deprecated" and v1 as "stable" (filecoin-project/lotus#13264)
  • feat(api): add StateMinerCreationDeposit API method for FIP-0077 - calculates the deposit required for creating a new miner (filecoin-project/lotus#13308)
  • feat(spcli): correctly handle the batch logic of lotus-miner actor settle-deal (#13189)
  • feat(spcli): add --all-deals to lotus-miner actor settle-deal (#13243)

🐛 Bug Fixes

📝 Changelog

For the set of changes since the last stable release:

Changes since RC2

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Rod Vagg 12 +1856/-720 49
TippyFlits 6 +1312/-897 60
tediou5 1 +610/-22 14
Phi-rjan 11 +455/-169 29
chris-4chain 1 +222/-23 7
Steven Allen 1 +142/-68 3
beck 2 +141/-52 8
dependabot[bot] 12 +81/-86 24
Steve Loeppky 5 +90/-42 22
hanabi1224 2 +91/-24 3
raul0ligma 1 +88/-4 5
William Morriss 3 +41/-13 7
Copilot 1 +46/-0 1
deepdring 1 +6/-6 6
Block Wizard 3 +6/-6 5
wmypku 1 +4/-4 2
queryfast 1 +4/-4 4
minxinyi 1 +4/-4 4
web3-bot 2 +3/-3 3
tzchenxixi 1 +3/-3 3
haouvw 1 +3/-3 2
TimberLake 1 +3/-3 2
Jakub Sztandera 2 +3/-3 3
Micke 1 +2/-2 2
longhutianjie 1 +1/-1 1
Piotr Galar 1 +1/-1 1
Phi 1 +1/-1 1
Loading

miner/v1.34.0

11 Sep 20:27
@github-actions github-actions
miner/v1.34.0
56e13cc
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.
Compare
Choose a tag to compare
miner/v1.34.0

Node and Miner v1.34.0 / 2025-09-11

This is a MANDATORY Lotus v1.34.0 release, which will deliver the Filecoin network version 27, codenamed “Golden Week” 🏮. This release candidate sets the upgrade epoch for the Mainnet network to Epoch 5348280: 2025-09-24T23:00:00Z. (See the local time for other timezones.)

☢️ Upgrade Warnings ☢️

  • All Lotus node and Storage Provider (SP) operators must upgrade to v1.34.x before the specified date for the Mainnet network.
  • The /v1 Ethereum APIs have "F3 awareness" for all Ethereum calls where "finalized" or "safe" are supplied. Nodes will likely return different (and likely more recent) results in v1.34.x+ than previous versions when these tags are used. See more info below.

🏛️ Filecoin network version 27 FIPs and FRCs

📦 v17 Builtin Actor Bundle

This release candidate uses v17.0.0.

🚚 Migration

All node operators, including storage providers, should be aware that ONE pre-migration is being scheduled 120 epochs before the network upgrade. The migration for the NV27 upgrade is expected to be light with no heavy pre-migrations:

  • Pre-Migration is expected to take less then 1 minute.
  • The migration on the upgrade epoch is expected to take less than 30 seconds on a node with a NVMe-drive and a newer CPU. For nodes running on slower disks/CPU, it is still expected to take less then 1 minute.
  • RAM usages is expected to be under 20GiB RAM for both the pre-migration and migration.

We recommend node operators (who haven’t enabled splitstore discard mode) that do not care about historical chain states, to prune the chain blockstore by syncing from a snapshot 1-2 days before the upgrade.

For certain node operators, such as full archival nodes or systems that need to keep large amounts of state (RPC providers), we recommend skipping the pre-migration and run the non-cached migration (i.e., just running the migration at the network upgrade epoch), and schedule for some additional downtime. Operators of such nodes can read the How to disable premigration in network upgrade tutorial.

⭐ New Features highlight

  • feat(eth): use F3 for "finalized" and "safe" resolution in v1 APIs. This switches the /v1 Ethereum APIs to have the same resolution rules as /v2, enabling F3 awareness for all Ethereum calls where "finalized" or "safe" is supplied. See F3-aware Ethereum APIs via /v2 endpoint and improvements to existing /v1 APIs below for details of how the /v2 APIs work as introduced in the 1.33.0 release. Set the environment variable LOTUS_ETH_V1_DISABLE_F3_FINALITY_RESOLUTION to 1 to revert this behaviour but note that the option to revert will likely be removed in a future release (tracking issue). (filecoin-project/lotus#13298)
  • feat(f3): expose simple ChainGetFinalizedTipSet API on v1 (and gateway) that just returns the latest F3 finalized tipset, or falls back to EC finality if F3 is not operational on the node or if the F3 finalized tipset is further back than EC finalized tipset. This API can be used for follow-up state calls that clamp to a specific tipset to have assurance of state finality. (filecoin-project/lotus#13299)
  • feat: support for F3-aware snapshot v2 format per FRC-0108 (filecoin-project/lotus#13282)
    • snapshot export now defaults to v2 format with embedded F3 finality certificates, dramatically reducing F3 catchup time from ~8 hours
    • transparently imports both v1 and v2 snapshot formats
    • to export v1 snapshots, use lotus chain export --skip-old-msgs --recent-stateroots=2001 --snapshot-version=1 <filename>
  • feat(net): add LOTUS_ENABLE_MESSAGE_FETCH_INSTRUMENTATION=1 to turn on metrics and debugging for local vs bitswap message fetching during block validation (filecoin-project/lotus#13221)

👌 Improvements

  • chore(docs): mark v0 API as "deprecated" and v1 as "stable" (filecoin-project/lotus#13264)
  • feat(api): add StateMinerCreationDeposit API method for FIP-0077 - calculates the deposit required for creating a new miner (filecoin-project/lotus#13308)
  • feat(spcli): correctly handle the batch logic of lotus-miner actor settle-deal (#13189)
  • feat(spcli): add --all-deals to lotus-miner actor settle-deal (#13243)

🐛 Bug Fixes

📝 Changelog

For the set of changes since the last stable release:

Changes since RC2

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Rod Vagg 12 +1856/-720 49
TippyFlits 6 +1312/-897 60
tediou5 1 +610/-22 14
Phi-rjan 11 +455/-169 29
chris-4chain 1 +222/-23 7
Steven Allen 1 +142/-68 3
beck 2 +141/-52 8
dependabot[bot] 12 +81/-86 24
Steve Loeppky 5 +90/-42 22
hanabi1224 2 +91/-24 3
raul0ligma 1 +88/-4 5
William Morriss 3 +41/-13 7
Copilot 1 +46/-0 1
deepdring 1 +6/-6 6
Block Wizard 3 +6/-6 5
wmypku 1 +4/-4 2
queryfast 1 +4/-4 4
minxinyi 1 +4/-4 4
web3-bot 2 +3/-3 3
tzchenxixi 1 +3/-3 3
haouvw 1 +3/-3 2
TimberLake 1 +3/-3 2
Jakub Sztandera 2 +3/-3 3
Micke 1 +2/-2 2
longhutianjie 1 +1/-1 1
Piotr Galar 1 +1/-1 1
Phi 1 +1/-1 1
Loading

v1.34.0-rc2

05 Sep 17:18
@github-actions github-actions
v1.34.0-rc2
c41477c
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.
Compare
Choose a tag to compare
v1.34.0-rc2 Pre-release
Pre-release

This is the second release candidate of the upcoming MANDATORY Lotus v1.34.0 release, which will deliver the Filecoin network version 27, codenamed “Golden Week” 🏮. This release candidate sets the upgrade epoch for the calibration network to Epoch 3007294: 2025-09-10T23:00:00Z. (See the local time for other timezones.)

This RC is required for participation in the nv27 calibration upgrade.

You can follow filecoin-project/lotus#13269 for keeping up with the other expected release dates, epochs, and updates.

Note

This release candidate does NOT set the mainnet network upgrade epoch. It will be added in the final release (expected 2025-09-11).

☢️ Upgrade Warnings ☢️

  • All Lotus node and Storage Provider (SP) operators must upgrade to v1.34.x before the specified dates for the Calibration and Mainnet networks.
  • The /v1 Ethereum APIs have "F3 awareness" for all Ethereum calls where "finalized" or "safe" are supplied. Nodes will likely return different (and likely more recent) results in v1.34.x+ than previous versions when these tags are used. See more info below.

🏛️ Filecoin network version 27 FIPs and FRCs

📦 v17 Builtin Actor Bundle

This release candidate uses v17.0.0-rc1.

🚚 Migration

There is no pre-migration or migration with this network upgrade.

⭐ New Features highlight

  • feat(eth): use F3 for "finalized" and "safe" resolution in v1 APIs. This switches the /v1 Ethereum APIs to have the same resolution rules as /v2, enabling F3 awareness for all Ethereum calls where "finalized" or "safe" is supplied. See F3-aware Ethereum APIs via /v2 endpoint and improvements to existing /v1 APIs below for details of how the /v2 APIs work as introduced in the 1.33.0 release. Set the environment variable LOTUS_ETH_V1_DISABLE_F3_FINALITY_RESOLUTION to 1 to revert this behaviour but note that the option to revert will likely be removed in a future release (tracking issue). (filecoin-project/lotus#13298)
  • feat(f3): expose simple ChainGetFinalizedTipSet API on v1 (and gateway) that just returns the latest F3 finalized tipset, or falls back to EC finality if F3 is not operational on the node or if the F3 finalized tipset is further back than EC finalized tipset. This API can be used for follow-up state calls that clamp to a specific tipset to have assurance of state finality. (filecoin-project/lotus#13299)
  • feat: support for F3-aware snapshot v2 format per FRC-0108 (filecoin-project/lotus#13282)
    • snapshot export now defaults to v2 format with embedded F3 finality certificates, dramatically reducing F3 catchup time from ~8 hours
    • transparently imports both v1 and v2 snapshot formats
    • to export v1 snapshots, use lotus chain export --skip-old-msgs --recent-stateroots=2001 --snapshot-version=1 <filename>
  • feat(net): add LOTUS_ENABLE_MESSAGE_FETCH_INSTRUMENTATION=1 to turn on metrics and debugging for local vs bitswap message fetching during block validation (filecoin-project/lotus#13221)

👌 Improvements

  • chore(docs): mark v0 API as "deprecated" and v1 as "stable" (filecoin-project/lotus#13264)
  • feat(api): add StateMinerCreationDeposit API method for FIP-0077 - calculates the deposit required for creating a new miner (filecoin-project/lotus#13308)
  • feat(spcli): correctly handle the batch logic of lotus-miner actor settle-deal (#13189)
  • feat(spcli): add --all-deals to lotus-miner actor settle-deal (#13243)

🐛 Bug Fixes

📝 Changelog

For the set of changes since the last stable release:

Changes since RC1

  • Using actors bundle v17.0.0-rc1 instead of v17.0.0-dev1.
  • Backported: fix: handle partial reads in UnpadReader for non-power-of-2 pieces (filecoin-project/lotus#13306)

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Rod Vagg 11 +1780/-717 47
TippyFlits 2 +1058/-734 32
tediou5 1 +610/-22 14
chris-4chain 1 +222/-23 7
Steven Allen 1 +142/-68 3
beck 2 +141/-52 8
Phi-rjan 7 +114/-75 20
dependabot[bot] 12 +81/-86 24
Steve Loeppky 7 +132/-29 7
hanabi1224 2 +91/-24 3
raul0ligma 1 +88/-4 5
William Morriss 3 +41/-13 7
Copilot 1 +46/-0 1
deepdring 1 +6/-6 6
Block Wizard 3 +6/-6 5
wmypku 1 +4/-4 2
queryfast 1 +4/-4 4
minxinyi 1 +4/-4 4
web3-bot 2 +3/-3 3
tzchenxixi 1 +3/-3 3
haouvw 1 +3/-3 2
TimberLake 1 +3/-3 2
Jakub Sztandera 2 +3/-3 3
Micke 1 +2/-2 2
longhutianjie 1 +1/-1 1
Loading

miner/v1.34.0-rc2

05 Sep 17:18
@github-actions github-actions
miner/v1.34.0-rc2
c41477c
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.
Compare
Choose a tag to compare
miner/v1.34.0-rc2 Pre-release
Pre-release

This is the second release candidate of the upcoming MANDATORY Lotus v1.34.0 release, which will deliver the Filecoin network version 27, codenamed “Golden Week” 🏮. This release candidate sets the upgrade epoch for the calibration network to Epoch 3007294: 2025-09-10T23:00:00Z. (See the local time for other timezones.)

This RC is required for participation in the nv27 calibration upgrade.

You can follow filecoin-project/lotus#13269 for keeping up with the other expected release dates, epochs, and updates.

Note

This release candidate does NOT set the mainnet network upgrade epoch. It will be added in the final release (expected 2025-09-11).

☢️ Upgrade Warnings ☢️

  • All Lotus node and Storage Provider (SP) operators must upgrade to v1.34.x before the specified dates for the Calibration and Mainnet networks.
  • The /v1 Ethereum APIs have "F3 awareness" for all Ethereum calls where "finalized" or "safe" are supplied. Nodes will likely return different (and likely more recent) results in v1.34.x+ than previous versions when these tags are used. See more info below.

🏛️ Filecoin network version 27 FIPs and FRCs

📦 v17 Builtin Actor Bundle

This release candidate uses v17.0.0-rc1.

🚚 Migration

There is no pre-migration or migration with this network upgrade.

⭐ New Features highlight

  • feat(eth): use F3 for "finalized" and "safe" resolution in v1 APIs. This switches the /v1 Ethereum APIs to have the same resolution rules as /v2, enabling F3 awareness for all Ethereum calls where "finalized" or "safe" is supplied. See F3-aware Ethereum APIs via /v2 endpoint and improvements to existing /v1 APIs below for details of how the /v2 APIs work as introduced in the 1.33.0 release. Set the environment variable LOTUS_ETH_V1_DISABLE_F3_FINALITY_RESOLUTION to 1 to revert this behaviour but note that the option to revert will likely be removed in a future release (tracking issue). (filecoin-project/lotus#13298)
  • feat(f3): expose simple ChainGetFinalizedTipSet API on v1 (and gateway) that just returns the latest F3 finalized tipset, or falls back to EC finality if F3 is not operational on the node or if the F3 finalized tipset is further back than EC finalized tipset. This API can be used for follow-up state calls that clamp to a specific tipset to have assurance of state finality. (filecoin-project/lotus#13299)
  • feat: support for F3-aware snapshot v2 format per FRC-0108 (filecoin-project/lotus#13282)
    • snapshot export now defaults to v2 format with embedded F3 finality certificates, dramatically reducing F3 catchup time from ~8 hours
    • transparently imports both v1 and v2 snapshot formats
    • to export v1 snapshots, use lotus chain export --skip-old-msgs --recent-stateroots=2001 --snapshot-version=1 <filename>
  • feat(net): add LOTUS_ENABLE_MESSAGE_FETCH_INSTRUMENTATION=1 to turn on metrics and debugging for local vs bitswap message fetching during block validation (filecoin-project/lotus#13221)

👌 Improvements

  • chore(docs): mark v0 API as "deprecated" and v1 as "stable" (filecoin-project/lotus#13264)
  • feat(api): add StateMinerCreationDeposit API method for FIP-0077 - calculates the deposit required for creating a new miner (filecoin-project/lotus#13308)
  • feat(spcli): correctly handle the batch logic of lotus-miner actor settle-deal (#13189)
  • feat(spcli): add --all-deals to lotus-miner actor settle-deal (#13243)

🐛 Bug Fixes

📝 Changelog

For the set of changes since the last stable release:

Changes since RC1

  • Using actors bundle v17.0.0-rc1 instead of v17.0.0-dev1.
  • Backported: fix: handle partial reads in UnpadReader for non-power-of-2 pieces (filecoin-project/lotus#13306)

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Rod Vagg 11 +1780/-717 47
TippyFlits 2 +1058/-734 32
tediou5 1 +610/-22 14
chris-4chain 1 +222/-23 7
Steven Allen 1 +142/-68 3
beck 2 +141/-52 8
Phi-rjan 7 +114/-75 20
dependabot[bot] 12 +81/-86 24
Steve Loeppky 7 +132/-29 7
hanabi1224 2 +91/-24 3
raul0ligma 1 +88/-4 5
William Morriss 3 +41/-13 7
Copilot 1 +46/-0 1
deepdring 1 +6/-6 6
Block Wizard 3 +6/-6 5
wmypku 1 +4/-4 2
queryfast 1 +4/-4 4
minxinyi 1 +4/-4 4
web3-bot 2 +3/-3 3
tzchenxixi 1 +3/-3 3
haouvw 1 +3/-3 2
TimberLake 1 +3/-3 2
Jakub Sztandera 2 +3/-3 3
Micke 1 +2/-2 2
longhutianjie 1 +1/-1 1
Loading

v1.34.0-rc1

04 Sep 23:06
@github-actions github-actions
v1.34.0-rc1
f74a494
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.
Compare
Choose a tag to compare
v1.34.0-rc1 Pre-release
Pre-release

Node and Miner v1.34.0-rc1 / 2025-09-04

This is the first release candidate of the upcoming MANDATORY Lotus v1.34.0 release, which will deliver the Filecoin network version 27, codenamed “Golden Week” 🏮. This release candidate sets the upgrade epoch for the calibration network to Epoch 3007294: 2025-09-10T23:00:00Z. (See the local time for other timezones.)

You can follow filecoin-project/lotus#13269 for keeping up with the other expected release dates, epochs, and updates.

Note

This release candidate does NOT set the mainnet network upgrade epoch. It will be added in the final release (expected 2025-09-11).

☢️ Upgrade Warnings ☢️

  • All Lotus node and Storage Provider (SP) operators must upgrade to v1.34.x before the specified dates for the Calibration and Mainnet networks.
  • The /v1 Ethereum APIs have "F3 awareness" for all Ethereum calls where "finalized" or "safe" are supplied. Nodes will likely return different (and likely more recent) results in v1.34.x+ than previous versions when these tags are used. See more info below.

🏛️ Filecoin network version 27 FIPs and FRCs

📦 v17 Builtin Actor Bundle

This release candidate uses v17.0.0-dev1.

🚚 Migration

There is no pre-migration or migration with this network upgrade.

⭐ New Features highlight

  • feat(eth): use F3 for "finalized" and "safe" resolution in v1 APIs. This switches the /v1 Ethereum APIs to have the same resolution rules as /v2, enabling F3 awareness for all Ethereum calls where "finalized" or "safe" is supplied. See F3-aware Ethereum APIs via /v2 endpoint and improvements to existing /v1 APIs below for details of how the /v2 APIs work as introduced in the 1.33.0 release. Set the environment variable LOTUS_ETH_V1_DISABLE_F3_FINALITY_RESOLUTION to 1 to revert this behaviour but note that the option to revert will likely be removed in a future release (tracking issue). (filecoin-project/lotus#13298)
  • feat(f3): expose simple ChainGetFinalizedTipSet API on v1 (and gateway) that just returns the latest F3 finalized tipset, or falls back to EC finality if F3 is not operational on the node or if the F3 finalized tipset is further back than EC finalized tipset. This API can be used for follow-up state calls that clamp to a specific tipset to have assurance of state finality. (filecoin-project/lotus#13299)
  • feat: support for F3-aware snapshot v2 format per FRC-0108 (filecoin-project/lotus#13282)
    • snapshot export now defaults to v2 format with embedded F3 finality certificates, dramatically reducing F3 catchup time from ~8 hours
    • transparently imports both v1 and v2 snapshot formats
    • to export v1 snapshots, use lotus chain export --skip-old-msgs --recent-stateroots=2001 --snapshot-version=1 <filename>
  • feat(net): add LOTUS_ENABLE_MESSAGE_FETCH_INSTRUMENTATION=1 to turn on metrics and debugging for local vs bitswap message fetching during block validation (filecoin-project/lotus#13221)

👌 Improvements

  • chore(docs): mark v0 API as "deprecated" and v1 as "stable" (filecoin-project/lotus#13264)
  • feat(api): add StateMinerCreationDeposit API method for FIP-0077 - calculates the deposit required for creating a new miner (filecoin-project/lotus#13308)
  • feat(spcli): correctly handle the batch logic of lotus-miner actor settle-deal (#13189)
  • feat(spcli): add --all-deals to lotus-miner actor settle-deal (#13243)

🐛 Bug Fixes

  • fix: properly handle all RPC API retry errors (#13279)
  • fix(api): eth_getCode and eth_getStorageAt now return state after the specified block rather than before it (filecoin-project/lotus#13274)
  • fix(api): eth_getTransactionCount now returns state after the specified block rather than before it (filecoin-project/lotus#13275)

📝 Changelog

For the set of changes since the last stable release:

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Rod Vagg 11 +1780/-717 47
TippyFlits 2 +1058/-734 32
tediou5 1 +610/-22 14
chris-4chain 1 +222/-23 7
Steven Allen 1 +142/-68 3
beck 2 +141/-52 8
Phi-rjan 7 +114/-75 20
dependabot[bot] 12 +81/-86 24
Steve Loeppky 7 +132/-29 7
hanabi1224 2 +91/-24 3
raul0ligma 1 +88/-4 5
William Morriss 3 +41/-13 7
Copilot 1 +46/-0 1
deepdring 1 +6/-6 6
Block Wizard 3 +6/-6 5
wmypku 1 +4/-4 2
queryfast 1 +4/-4 4
minxinyi 1 +4/-4 4
web3-bot 2 +3/-3 3
tzchenxixi 1 +3/-3 3
haouvw 1 +3/-3 2
TimberLake 1 +3/-3 2
Jakub Sztandera 2 +3/-3 3
Micke 1 +2/-2 2
longhutianjie 1 +1/-1 1
Loading

miner/v1.34.0-rc1

04 Sep 23:07
@github-actions github-actions
miner/v1.34.0-rc1
f74a494
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.
Compare
Choose a tag to compare
miner/v1.34.0-rc1 Pre-release
Pre-release

Node and Miner v1.34.0-rc1 / 2025-09-04

This is the first release candidate of the upcoming MANDATORY Lotus v1.34.0 release, which will deliver the Filecoin network version 27, codenamed “Golden Week” 🏮. This release candidate sets the upgrade epoch for the calibration network to Epoch 3007294: 2025-09-10T23:00:00Z. (See the local time for other timezones.)

You can follow filecoin-project/lotus#13269 for keeping up with the other expected release dates, epochs, and updates.

Note

This release candidate does NOT set the mainnet network upgrade epoch. It will be added in the final release (expected 2025-09-11).

☢️ Upgrade Warnings ☢️

  • All Lotus node and Storage Provider (SP) operators must upgrade to v1.34.x before the specified dates for the Calibration and Mainnet networks.
  • The /v1 Ethereum APIs have "F3 awareness" for all Ethereum calls where "finalized" or "safe" are supplied. Nodes will likely return different (and likely more recent) results in v1.34.x+ than previous versions when these tags are used. See more info below.

🏛️ Filecoin network version 27 FIPs and FRCs

📦 v17 Builtin Actor Bundle

This release candidate uses v17.0.0-dev1.

🚚 Migration

There is no pre-migration or migration with this network upgrade.

⭐ New Features highlight

  • feat(eth): use F3 for "finalized" and "safe" resolution in v1 APIs. This switches the /v1 Ethereum APIs to have the same resolution rules as /v2, enabling F3 awareness for all Ethereum calls where "finalized" or "safe" is supplied. See F3-aware Ethereum APIs via /v2 endpoint and improvements to existing /v1 APIs below for details of how the /v2 APIs work as introduced in the 1.33.0 release. Set the environment variable LOTUS_ETH_V1_DISABLE_F3_FINALITY_RESOLUTION to 1 to revert this behaviour but note that the option to revert will likely be removed in a future release (tracking issue). (filecoin-project/lotus#13298)
  • feat(f3): expose simple ChainGetFinalizedTipSet API on v1 (and gateway) that just returns the latest F3 finalized tipset, or falls back to EC finality if F3 is not operational on the node or if the F3 finalized tipset is further back than EC finalized tipset. This API can be used for follow-up state calls that clamp to a specific tipset to have assurance of state finality. (filecoin-project/lotus#13299)
  • feat: support for F3-aware snapshot v2 format per FRC-0108 (filecoin-project/lotus#13282)
    • snapshot export now defaults to v2 format with embedded F3 finality certificates, dramatically reducing F3 catchup time from ~8 hours
    • transparently imports both v1 and v2 snapshot formats
    • to export v1 snapshots, use lotus chain export --skip-old-msgs --recent-stateroots=2001 --snapshot-version=1 <filename>
  • feat(net): add LOTUS_ENABLE_MESSAGE_FETCH_INSTRUMENTATION=1 to turn on metrics and debugging for local vs bitswap message fetching during block validation (filecoin-project/lotus#13221)

👌 Improvements

  • chore(docs): mark v0 API as "deprecated" and v1 as "stable" (filecoin-project/lotus#13264)
  • feat(api): add StateMinerCreationDeposit API method for FIP-0077 - calculates the deposit required for creating a new miner (filecoin-project/lotus#13308)
  • feat(spcli): correctly handle the batch logic of lotus-miner actor settle-deal (#13189)
  • feat(spcli): add --all-deals to lotus-miner actor settle-deal (#13243)

🐛 Bug Fixes

  • fix: properly handle all RPC API retry errors (#13279)
  • fix(api): eth_getCode and eth_getStorageAt now return state after the specified block rather than before it (filecoin-project/lotus#13274)
  • fix(api): eth_getTransactionCount now returns state after the specified block rather than before it (filecoin-project/lotus#13275)

📝 Changelog

For the set of changes since the last stable release:

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
Rod Vagg 11 +1780/-717 47
TippyFlits 2 +1058/-734 32
tediou5 1 +610/-22 14
chris-4chain 1 +222/-23 7
Steven Allen 1 +142/-68 3
beck 2 +141/-52 8
Phi-rjan 7 +114/-75 20
dependabot[bot] 12 +81/-86 24
Steve Loeppky 7 +132/-29 7
hanabi1224 2 +91/-24 3
raul0ligma 1 +88/-4 5
William Morriss 3 +41/-13 7
Copilot 1 +46/-0 1
deepdring 1 +6/-6 6
Block Wizard 3 +6/-6 5
wmypku 1 +4/-4 2
queryfast 1 +4/-4 4
minxinyi 1 +4/-4 4
web3-bot 2 +3/-3 3
tzchenxixi 1 +3/-3 3
haouvw 1 +3/-3 2
TimberLake 1 +3/-3 2
Jakub Sztandera 2 +3/-3 3
Micke 1 +2/-2 2
longhutianjie 1 +1/-1 1
Loading

v1.33.1

01 Aug 07:10
@github-actions github-actions
v1.33.1
0cad9ad
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.
Compare
Choose a tag to compare
v1.33.1

This is the Lotus v1.33.1 release, which introduces performance improvements and operational enhancements. This release focuses on improving F3 subsystem performance, and enhancing CLI tools for better storage provider operations. Notable improvements include up to 6-10x performance gains in F3 power table calculations, ensuring that PreCommit and ProveCommit operations are aggregating to get optimal gas usage after FIP-100, and a enhanced sector management tool with CSV output support. These improvements collectively enhance the stability and efficiency of Lotus operations for both node operators and storage providers.

☢️ Upgrade Warnings ☢️

  • There are no upgrade warnings for this release candidate.

⭐ Feature/Improvement Highlights:

  • fix(cli): fix lotus state sector command to display DealIDs correctly post-FIP-0076 by querying market actor's ProviderSectors HAMT while maintaining backward compatibility with DeprecatedDealIDs field (filecoin-project/lotus#13140)
  • feat(spcli): make settle-deal optionally take deal id ranges (filecoin-project/lotus#13146)
  • feat(miner): Adjust PreCommit & ProveCommit logic for optimal nv25 gas usage: (filecoin-project/lotus#13049)
    • remove deprecated pre-nv25 code, including batch balancer calculations
    • default to PreCommit batching
    • default to ProveCommit aggregation
    • remove config options: AggregateCommits, AggregateAboveBaseFee, BatchPreCommitAboveBaseFee
  • feat(paych): add EnablePaymentChannelManager config option and disable payment channel manager by default (filecoin-project/lotus#13139)
  • feat(gateway): add CORS headers if --cors is provided (filecoin-project/lotus#13145)
  • feat(f3): move go-f3 datastore to separate leveldb instance (filecoin-project/lotus#13174)
  • lotus state active-sectors now outputs CSV format and supports an optional --show-partitions to list active sector deadlines and partitions. (filecoin-project/lotus#13152)
  • feat: ExpectedRewardForPower builtin utility function and lotus-shed miner expected-reward CLI command (filecoin-project/lotus#13138)
  • feat(api): update go-f3 to 0.8.8, add F3GetPowerTableByInstance to the API (filecoin-project/lotus#13201)
  • feat(f3): integrate cached MapReduce from go-hamt-ipld, which improves performance of F3 power table calculation by 6-10x (filecoin-project/lotus#13134)

🐛 Bug Fix Highlights

📝 Changelog

For the full set of changes since the last stable release:

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
TippyFlits 6 +38440/-212 201
Masih H. Derkani 32 +10241/-3770 171
Jakub Sztandera 33 +2823/-1753 146
Rod Vagg 17 +2089/-238 67
Steven Allen 7 +885/-741 15
Steve Loeppky 8 +389/-395 29
hanabi1224 1 +533/-8 5
Phi-rjan 8 +346/-169 37
Sarkazein 3 +364/-53 14
tediou5 4 +48/-318 29
Barbara Peric 5 +315/-24 12
beck 3 +116/-89 8
dependabot[bot] 21 +92/-90 42
Łukasz Magiera 1 +173/-0 2
Copilot 2 +106/-66 5
Krishang Shah 1 +113/-0 5
Piotr Galar 3 +47/-3 6
Phi 1 +12/-12 11
terry.hung 1 +15/-6 1
Degen Dev 2 +8/-8 6
bytesingsong 1 +7/-7 6
Anna Smith 1 +7/-7 4
Aida Syoko 1 +6/-6 5
cuithon 1 +5/-5 5
shandongzhejiang 1 +4/-4 4
geekvest 1 +4/-4 3
Block Wizard 1 +4/-4 3
bytetigers 1 +3/-3 3
ZenGround0 1 +2/-3 1
web3-bot 2 +2/-2 2
findmyhappy 1 +2/-2 1
emmmm 1 +2/-2 2
dumikau 1 +2/-2 2
David Klank 1 +2/-2 1
gopherorg 1 +1/-1 1
VolodymyrBg 1 +1/-1 1
Hubert 1 +1/-1 1
GarmashAlex 1 +1/-1 1
James Niken 1 +0/-1 1
Loading

miner/v1.33.1

01 Aug 07:09
@github-actions github-actions
miner/v1.33.1
0cad9ad
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.
Compare
Choose a tag to compare
miner/v1.33.1

This is the Lotus v1.33.1 release, which introduces performance improvements and operational enhancements. This release focuses on improving F3 subsystem performance, and enhancing CLI tools for better storage provider operations. Notable improvements include up to 6-10x performance gains in F3 power table calculations, ensuring that PreCommit and ProveCommit operations are aggregating to get optimal gas usage after FIP-100, and a enhanced sector management tool with CSV output support. These improvements collectively enhance the stability and efficiency of Lotus operations for both node operators and storage providers.

☢️ Upgrade Warnings ☢️

  • There are no upgrade warnings for this release candidate.

⭐ Feature/Improvement Highlights:

  • fix(cli): fix lotus state sector command to display DealIDs correctly post-FIP-0076 by querying market actor's ProviderSectors HAMT while maintaining backward compatibility with DeprecatedDealIDs field (filecoin-project/lotus#13140)
  • feat(spcli): make settle-deal optionally take deal id ranges (filecoin-project/lotus#13146)
  • feat(miner): Adjust PreCommit & ProveCommit logic for optimal nv25 gas usage: (filecoin-project/lotus#13049)
    • remove deprecated pre-nv25 code, including batch balancer calculations
    • default to PreCommit batching
    • default to ProveCommit aggregation
    • remove config options: AggregateCommits, AggregateAboveBaseFee, BatchPreCommitAboveBaseFee
  • feat(paych): add EnablePaymentChannelManager config option and disable payment channel manager by default (filecoin-project/lotus#13139)
  • feat(gateway): add CORS headers if --cors is provided (filecoin-project/lotus#13145)
  • feat(f3): move go-f3 datastore to separate leveldb instance (filecoin-project/lotus#13174)
  • lotus state active-sectors now outputs CSV format and supports an optional --show-partitions to list active sector deadlines and partitions. (filecoin-project/lotus#13152)
  • feat: ExpectedRewardForPower builtin utility function and lotus-shed miner expected-reward CLI command (filecoin-project/lotus#13138)
  • feat(api): update go-f3 to 0.8.8, add F3GetPowerTableByInstance to the API (filecoin-project/lotus#13201)
  • feat(f3): integrate cached MapReduce from go-hamt-ipld, which improves performance of F3 power table calculation by 6-10x (filecoin-project/lotus#13134)

🐛 Bug Fix Highlights

📝 Changelog

For the full set of changes since the last stable release:

👨‍👩‍👧‍👦 Contributors

Contributor Commits Lines ± Files Changed
TippyFlits 6 +38440/-212 201
Masih H. Derkani 32 +10241/-3770 171
Jakub Sztandera 33 +2823/-1753 146
Rod Vagg 17 +2089/-238 67
Steven Allen 7 +885/-741 15
Steve Loeppky 8 +389/-395 29
hanabi1224 1 +533/-8 5
Phi-rjan 8 +346/-169 37
Sarkazein 3 +364/-53 14
tediou5 4 +48/-318 29
Barbara Peric 5 +315/-24 12
beck 3 +116/-89 8
dependabot[bot] 21 +92/-90 42
Łukasz Magiera 1 +173/-0 2
Copilot 2 +106/-66 5
Krishang Shah 1 +113/-0 5
Piotr Galar 3 +47/-3 6
Phi 1 +12/-12 11
terry.hung 1 +15/-6 1
Degen Dev 2 +8/-8 6
bytesingsong 1 +7/-7 6
Anna Smith 1 +7/-7 4
Aida Syoko 1 +6/-6 5
cuithon 1 +5/-5 5
shandongzhejiang 1 +4/-4 4
geekvest 1 +4/-4 3
Block Wizard 1 +4/-4 3
bytetigers 1 +3/-3 3
ZenGround0 1 +2/-3 1
web3-bot 2 +2/-2 2
findmyhappy 1 +2/-2 1
emmmm 1 +2/-2 2
dumikau 1 +2/-2 2
David Klank 1 +2/-2 1
gopherorg 1 +1/-1 1
VolodymyrBg 1 +1/-1 1
Hubert 1 +1/-1 1
GarmashAlex 1 +1/-1 1
James Niken 1 +0/-1 1
Loading