Customizable Bootloader for STM32 microcontrollers. This example demonstrates how to perform in-application-programming of a firmware located on an external SD card with FAT32 file system.

Efficient DMA timeout mechanism for peripheral DMA configured in circular mode demonstrated on a STM32 microcontroller.

BMS - Control the charger and fuel gauge using STM32L4

Bachelor thesis - SensorTile STLCS02V1 firmware developed for my bachelor thesis

Firmware for the SX1280 based RC Receiver

The purpose of this project is to bypass the physical requirements of the BootLoader access. The approach is the trigger the MCU to enter BootLoader Mode via UART by only using Tx, Rx and Gnd pins. Moreover, the trigger UART port can also be used to program the MCU.

A bare metal UART driver for STM32L476 MCUs to play a game of rock paper scissors with AVR MCUs.

A real-time light measurement system for STM32L476 MCUs, implemented with FreeRTOS.

Minigame using mems & display of STM32L476 Discovery Board.

Pure Assembly code solution to blink LED on stm32f4 Nucleo board, with button press

A bare metal I2C driver for STM32L476 MCUs to communicate with TSL2591 light sensors.

A basic blinky LED project for STM32L4 MCUs, built on FreeRTOS.

Draft pour Meccano Robot. Mixed STM32CubeMX, FreeRTOS, C

谷雨NB-IOT开发板开源例程